Related Manuals for RadioLink R6DSM
Summary of Contents for RadioLink R6DSM
- Page 1 R6DSM (FHSS and DSSS spread spectrum) Radiolink R6DSM, 2.4G 10 channels receiver, DSSS and FHSS spread spectrum working synchronously, 1 gram weight, SUBS signal, use for Radiolink transmitters AT9, AT9S，AT10 and AT10II, is the best choice for racing drone.
- Page 2 2. Turn on the transmitter, then power on the R6DSM. 3. Connect CH3 of R6DSM to ESC. 4. There is a black button on the R6DSM, press the binding button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when...
- Page 3 Installment of receiver antenna： 1. The antenna must be kept as straight as possible. Otherwise it will reduce the effective range. 2. Large model aircraft may of some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude.