Chapter 3 Motherboard Connections; Power Connections - Supermicro SuperServer E200-8D User Manual

Motherboard Connections
This section describes the connections on the X10SDV-6C-TLN4F motherboard and provides
pinout definitions. Note that depending on how the system is configured, not all connections
are required. The LEDs on the motherboard are also described here. A motherboard layout
indicating component locations may be found in Chapter 1.
Please review the safety precautions in Appendix B before installing or removing components.

3.1 Power Connections

ATX PWR, DC PWR and HDD PWR Connectors (JPW1, PJ1, J6)
The 24-pin ATX power connector at JPW1 is used to provide power to the motherboard. PJ1
is the 12V DC power connector that provides alternative power for special enclosure when
the 24-pin ATX power is not in use. The 4-pin HDD power connector J6 provides power to
onboard HDD devices.
Chapter 3
ATX Power 24-pin Connector
Pin Definitions
Pin# Definition Pin#
13 +3.3V 1
14 NC 2
15 Ground 3
16 PS_ON 4
17 Ground 5
18 Ground 6
19 Ground 7
20 Res (NC) 8
21 +5V 9
22 +5V 10
23 +5V 11
24 Ground 12
1
3
2
4
Required Connection
4
1
29

Chapter 3 Motherboard Connections

Definition
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PWR_OK
5VSB
+12V
+12V
+3.3V
+12V 4-pin Power
Pin Definitions
Pin# Definition
1 - 2 Ground
3 - 4 +12V
4-Pin HDD Power
Pin Definitions (J6)
Pin# Definition
1 12V
2-3 GND
4 5V