D-Link DES-3326SRM Command Line Interface Reference Manual page 311

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
delete ospf area
Purpose
Syntax
Description
Parameters
Restrictions
To create an OSPF area:
DES-3326SR:4#delete ospf area 10.48.74.122
Command: delete ospf area 10.48.74.122
Success.
DES-3326SR:4#
OSPF Configuration Commands
Used to delete an OSPF area.
delete ospf area <area_id>
This command is used to delete an OSPF
area.
<area_id>
the form of an IP address (xxx.xxx.xxx.xxx)
that uniquely identifies the OSPF area in the
OSPF domain.
Only administrator-level users can issue this
command.
<area_id> A 32-bit number in
311