Setup > Ddns - D-Link SECURICAM DCS-910 User Manual

Section  - Configuration
In this section, you can configure the DDNS setting
for your camera. DDNS will allow all users to access
your camera using a domain name instead of an IP
address.
DDNS:
(Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it
has been modified. The username and password are required when using the DDNS service.
Enable:
Click to enable the DDNS function.
Server Address:
Select your Dynamic DNS Server from the pull down menu.
Host Name:
Enter the host name of the DDNS server.
User Name:
Enter your username or e-mail used to connect to the DDNS.
Password:
Enter your password used to connect to the DDNS server.
D-Link DCS-910/90 User Manual
Setup > DDNS
0