Setup > Ftp; Ftp Server - D-Link SECURICAM DCS-910 User Manual

Section  - Configuration
In this section, you can configure a FTP server to receive the images.
Host Address:
This is the IP address of the FTP server that you will be connecting to.
Port Number:
Default is port 21. If changed, external FTP client program must change
the server connection port accordingly.
User Name:
Specifies the user name to access the external FTP server. If you are to
upload snapshots to an FTP server you will need to fill in the Domain name
or IP address of your external FTP server. The following user settings must
be correctly configured for remote access.
Password:
Specifies the password to access the external FTP server.
Directory Path:
Specifies the destination folder in the external FTP server.
Passive Mode:
Enabling passive mode will allow access to an external FTP server if your
camera is behind a router protected by a firewall.
D-Link DCS-910/90 User Manual
Setup > FTP

FTP Server