D-Link SECURICAM DCS-910 User Manual page 27

Section  - Configuration
If you have a Dynamic DNS account and would like the camera to
update your IP address automatically, enable DDNS and enter your
host information.
Click Next to proceed.
Click Next
Enter a name for your camera.
Then, click Next to proceed.
Click Next
Configure the correct time to ensure that all events triggered,
captured and scheduled at the right time.
Then, click Next to proceed.
Click Next
This page displays your configured settings. Click Apply to save
and activate the setting, or Back to change your settings.
Click Apply
D-Link DCS-910/90 User Manual