Connection Of The Dcs-2100; Backup Settings; Using The Monitor Program - D-Link SECURICAM DCS-2100 User Manual

DCS-2100 User's Manual

Backup Settings

Using Backup Settings in the global settings window, you can backup recorded data
from selected cameras to a specified location.
Directory:
Backup Location
After you have set your backup settings in the global settings window, you can backup
recorded data by clicking "Backup" in the Configuration Menu, as seen below:

Using the Monitor Program

This section depicts, in detail, how to manipulate the monitor tool.

Connection of the DCS-2100

Once you have the privilege to connect to the DCS-2100, the cameras will automatically
appear in the video area in the order they are connected. Once you have set up the
camera in the video channel, the color of the channel number will turn blue, indicating
that the camera has been added to IP surveillance. If you do not set up the camera for
the video channel, the color of the channel number will be gray.
D-Link Systems, Inc.
This is the directory where backup data will be saved. You can
select the location by clicking on the folder icon.
You can set the size limit of the data that will be backed up. The
Size:
default size limit is 10MB. The maximum value for this setting
depends on the amount of Free Space available on your hard
drive. This value can be found under the "Record Disk space
Usage Settings" section of the global settings window.
Select the locations to backup by clicking the checkbox next to
Select:: the location/camera name. To delete a location, select the
location and click the "Delete" button to the right of the Backup
Location Select window.
Using IP Surveillance Software
91