Alert Message - D-Link SECURICAM DCS-2100 User Manual

DCS-2100 User's Manual
Clicking on the "DI/DO" button shown below, you can switch to the DI/DO controls. The
color of the channel number indicates the status of the camera's DI (Digital Input). You
can click the "Switch button" to change the HI/LOW state of the DO (Digital Output). With
these features, you can monitor the remote sensor input from DI and also trigger the
camera by DO switch.
When the color of a DI/DO channel number is gray, that means the video channel has
not yet been connected to a camera.

Alert Message

D-Link Systems, Inc.
PT
Using IP Surveillance Software
97