D-Link SECURICAM DCS-2100 User Manual page 119

DCS-2100 User's Manual
For detailed information about each setting, please refer to Configuration > Advanced
> Motion Detection in the section titled "Using the DCS-2100 With an Internet Browser"
(page 55).
Next, run the IP surveillance program. Click on the Configurations button and select
Scheduler.
In the Primary Schedule you can choose either Once (for one time recording) or Every
Day (for scheduled recording). For example, if you would like to record events every
day during a certain time frame, click on the beginning time and drag your mouse to the
ending time. Schedule recording can be configured by minutes, hours, days, weeks, or
months.
The Secondary Schedule allows you to set a schedule outside the Primary Schedule.
The Secondary Schedule provides two options to record without a specified date or
time. You can select Event Mode, which will record whenever an event is triggered, or
Continuous Mode, which will begin continuously after scheduling settings are saved.
You do not need to set the Secondary Schedule with the Primary Schedule. To
schedule video recording with motion detection, you can use either the Primary
Schedule or Secondary Schedule, or both.
D-Link Systems, Inc.
Schedule Video Recording with Motion Detection
119