Record Snapshots To Your Ftp Server With Motion Detection - D-Link SECURICAM DCS-2100 User Manual

DCS-2100 User's Manual
Record Snapshots to your FTP
server with Motion Detection
Administrators can combine options on the application page to perform many useful
security applications. There are two kinds of actions that can respond to the motion
detection event that include uploading snapshots over the internet and driving attached
devices. To upload the snapshots, users can choose either email or FTP according to
user's needs. Both e-mail and FTP use the network settings on the network page. This
section describes how to enable motion detecting and record snapshots to an FTP
server.
If no external sensor is available, administrators can utilize the built-in motion detection
to monitor any abnormal movement and then record the snapshots to an FTP server.
Click the Motion Detection button under the Advanced tab from the Configuration
screen to access settings that affect how the DCS-2100 Internet Camera can serve as
a security device by recording only when motion is detected.
D-Link Systems, Inc.

Record Snapshots to your FTP Server with Motion Detection

66