Schedule Video Recording With Motion Detection - D-Link SECURICAM DCS-2100 User Manual

DCS-2100 User's Manual
Schedule Video Recording with
Motion Detection
To schedule video recording with motion detection, you must first enable motion
detection on the Internet Camera. Click the Motion Detection button under the
Advanced tab from the Configuration screen to access settings that affect how the
DCS-2100 Internet Camera can serve as a security device by recording only when
motion is detected. Note: These settings can be configured in your Web browser and
while logged into the IP surveillance Program.
In this window, follow the steps below to ensure that motion detection is correctly enabled:
1 Check "Enable motion detection."
2 Click on "New" to have a new window to monitor video.
3 Enter in a window name.
4 Adjust the "Sensitivity" and "Percentage" levels according to the local environment.
The highest sensitivity and lowest percentage provides the most sensitive setting.
5 After adding the motion window, click on save to enable the activity display. You
can add up to 3 motion windows to trigger recording.
D-Link Systems, Inc.

Schedule Video Recording with Motion Detection

118