Section 3 - Configuration
Camera Settings
Once you have completed the initial configuration of the DCS-1110 using the Web-based interface, you can review or
change your configuration using either the Web-based configuration utility or the Settings in the DCS-1110 IPView SE.
Configure Camera from Web
Click the Configure Camera from Web button
to start configuring your camera from the web again (see page
21).
Motion Setting
Click the Motion Setting button
to setup the options for motion recording. On this screen you can select to
Invoke Alarm and/or Send E-mail. Click the E-mail Setting button to configure your E-mail. The Sensitivity Level
can be adjusted between Low and High for motion recording.
D-Link DCS-1110 User Manual
59