Camera Settings - D-Link DCS-900 Manual

Section 3 - Configuration

Camera Settings

Once you have completed the initial configuration of the DCS-900 using the Web-based interface, you can review or
change your configuration using either the Web-based configuration utility or the Settings in the DCS-900 IPView SE.
Configure Camera from Web
Click the Configure Camera from Web button to start configuring your camera from the web again (see page
19).
Motion Setting
Click the Motion Setting button to setup the options for motion recording. On this screen you can select to
Invoke Alarm and/or Send E-mail. Click the E-mail Setting button to configure your E-mail. The Sensitivity Level
can be adjusted between Low and High for motion recording.
D-Link DCS-900 User Manual 56