How To Change The Ip Address - D-Link DCS-1110 User Manual

Section 3 - Configuration

How to Change the IP Address

To change a camera's IP Address, you must highlight
the camera you wish to change. Click the Change IP
Address button and the Change IP Address dialog
box will appear. Select Manually Assign IP if you
want to connect manually to the camera by providing
the IP Address, Subnet Mask, and Default Gateway.
Select DHCP if you do not wish to assign an IP
address to your camera.
You may also click the Assign IP to a Camera button
on the IPView SE, which will bring up the Browse
screen from above. Simply click the Change IP
Address button and the Change IP Address dialog
box will appear. Select Manually Assign IP if you
want to connect manually to the camera by providing
the IP Address, Subnet Mask, and Default Gateway.
Select DHCP if you would like to connect to only
cameras on your network.
D-Link DCS-1110 User Manual 54