D-Link DCS-1110 User Manual page 23

Section 3 - Configuration
Logout: Click to log out of the DCS-1110. If you would like to view or configure the camera, you will need to log in
again.
This option adjust the camera sensor's setting to avoid the image flickering issue under certain light sources.
Anti Flicker:
Only use this option when it is necessary.
Select this if the camera is operating under low light conditions. In this setting, the DCS-1110 will be able
Nightshot:
to view at 0.5 Lux.
There are 11 settings ranging from -5 to +5. From -5, the darkest setting to +5 the brightest setting. After
Brightness:
selecting your setting, please wait a few seconds for the camera to adjust accordingly.
The DCS-1110 is able to record video from the Web Browser into a local hard drive of the PC that is viewing
File Path:
it. This path can be specified (for example, c:\dcs1110\myrecording).
Start Video Clicking this button will start recording video and audio immediately to the file path specified above.
Recording:
D-Link DCS-1110 User Manual 23