Trigger - D-Link DCS-1110 User Manual

Section 3 - Configuration
SMTP Login
The user name used to log into your e-mail
Name:
account (e.g. jdoe or jdoe@yourisp.com
depending on your ISP).
The password used to log into your e-mail
STMP Password:
account. (The password will appear as
dots instead of entered characters.)
STMP (Mail)
The domain name or IP address of
Server:
external mail server.
The return e-mail address to use if the
Return E-mail
address:
snapshot or system log e-mail fails to
send. (This address should be within the
SMTP server's domain for authentication
purposes.)
The e-mail address of recipients for
Recipient E-mail
address:
snapshots or a system log file.
This is the port number for your SMTP server, the default is 25. If you use a port other than 25 you can
STMP Port:
change it here.
Increasing the time set here will avoid false alarms.This option allows you to set the amount of time between
Motion Detection
Skip Time:
motion detection events before the next recording will start.
D-Link DCS-1110 User Manual

Trigger

35