Storage And Folding Instructions - Stamina 35-1681A Owner's Manual

STORAGE AND FOLDING INSTRUCTIONS

The Circuit Trainer Trampoline can be folded as illustrated for easy storage. Please see the following steps:
WARNING ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE
!
CIRCUIT TRAINER TRAMPOLINE. FAILURE TO USE TWO OR MORE STRONG
PEOPLE MAY ALLOW THE RAILS TO SPRING BACK INTO THE FOLDED
POSITION AND STRIKE SOMEONE WHICH CAN CAUSE SERIOUS BODILY
INJURY OR DEATH.
Remove the SAFETY PAD(6) before folding the trampoline for storage. Failure to
remove the pad will result in damage to the pad.
To avoid damage to the electronics meter, remove the battery before storing the
Circuit Trainer Trampoline for one year or more.
Be very careful not to damage the sensor wire when removing the METER(20) and
the SENSOR DETECTOR(21).
STEP 1
Unplug the sensor wire from back of the METER(20). Remove
the METER(20) from the MOUNTING BRACKET(22).
Unscrew the LOCKING KNOB(24) and remove the
SENSOR DETECTOR(21) from the mounting bar.
STEP 2
Unscrew the four LEGS(7) from the trampoline. Remove the LEG CAPS(12) from the two HOOKED LEGS(8).
STEP 3
Remove the SAFETY PAD(6) from the rail frame and HOOKED LEGS(8). Refer to illustration Step 3. Press
the LEG CAPS(12) back on the HOOKED LEGS(8).
Step 2
The safety pad must
be removed before
folding the trampoline.
19
Step 1
Mounting
Bar
Step 3