Storage And Folding Instructions - Stamina inTONE Plus Owner's Manual

STORAGE AND FOLDING INSTRUCTIONS

The inTONE® Rebounder can be folded as illustrated for easy storage. Please see the following steps:
WARNING ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE
!
inTONE® REBOUNDER. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY
ALLOW THE RAILS TO SPRING BACK INTO THE FOLDED POSITION AND STRIKE
SOMEONE WHICH CAN CAUSE SERIOUS BODILY INjURY OR DEATH.
Remove the SAFETY PAD(6) before folding the trampoline for storage. Failure to
remove the pad will result in damage to the pad.
To avoid damage to the electronics meter, remove the battery before storing the
inTONE® Rebounder for one year or more.
Be very careful not to damage the sensor wire when removing the METER(20) and
the SENSOR DETECTOR(21).
STEP 1
Unplug the sensor wire from back of the METER(20). Remove
the METER(20) from the MOUNTING BRACKET(22).
Remove the LEG CAP(8) from the LEG(7). Unscrew
the LOCKING KNOB(24) and remove the SENSOR
DETECTOR(21) from the LEG(7). Press the LEG CAP(8)
back on the LEG(7).
STEP 2
Unscrew the LEGS(7) from the trampoline and remove the RESISTANCE TUBES(16).
10
Step 1
Step 2