Table of Contents
Advertisement
STORAGE INSTRUCTIONS
The INMOTION trampoline can be folded as illustrated for easy storage. Please follow the following process:
NOTICE:
ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE INMOTION
TRAMPOLINE. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THE RAILS TO
SPRING BACK INTO THE FOLDED POSITION AND STRIKE SOMEONE WHICH CAN CAUSE
SERIOUS BODILY INJURY OR DEATH.
Remove the safety pad before folding the trampoline for storage. Failure to remove the pad will
result in damage to the pad.
STEP 1:
Unscrew the LEGS(7) from the trampoline. Refer to
illustration 1.
STEP 2:
Remove the SAFETY PAD(6) from the frame. After the
SAFETY PAD(6) is removed, place the trampoline on the floor
with the threaded connectors pointing up. Refer to illustration 2.
STOP!
ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD
OR FOLD THE INMOTION TRAMPOLINE. FAILURE TO USE TWO OR MORE
STRONG PEOPLE MAY ALLOW THE RAILS TO SPRING BACK INTO THE
FOLDED POSITION AND STRIKE SOMEONE WHICH CAN CAUSE SERIOUS
BODILY INJURY OR DEATH.
STEP 3:
To prevent the trampoline from snapping into the folded position, push down the four RAILS.
Then unhook the Wire Ring from the SECURE PINS(10) and turn the pins to a flat position to remove the
pins. Firmly grasp both sides of the trampoline and fold the trampoline upward, the trampoline will fold
upward at the BRACKETS as shown in illustration 3.
2.
The safety pad must
be removed before
folding the trampoline.
STEP 4:
Refer to illustration 4. Set the position of the SECURE PINS(10) as shown. lift up the RAILS
(1, 2) and Insert the SECURE PINS(10) back to the RAILS(1, 2), and hook the Wire Rings onto the pins
from the bottom of the RAILS(1, 2).
STEP 5:
Fold the trampoline again as shown in illustration 5.
4.
Wire Ring
Threaded
Connector
Wire Ring
3.
Bracket
5.
8
1.
Advertisement
Table of Contents
