Stamina 35-1681A Owner's Manual page 20

Circuit trainer trampoline
Table of Contents

Advertisement

STORAGE AND FOLDING INSTRUCTIONS
STEP 4
Refer to illustration Step 4. Unscrew the two HOOKED LEGS(8) from the trampoline. Fold the HOOKED
LEGS(8) down and secure in folded position with the elastic Bands.
STOP!
ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE
CIRCUIT TRAINER TRAMPOLINE. FAILURE TO USE TWO OR MORE STRONG PEOPLE
MAY ALLOW THE RAILS TO SPRING BACK INTO THE FOLDED POSITION AND STRIKE
SOMEONE WHICH CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
STEP 5
To prevent the trampoline from snapping into the folded position, push the four RAILS down. Then unhook
the Wire Ring from the SECURE PINS(14) and turn the pins to a flat position to remove the pins. Firmly
grasp both sides of the trampoline and fold the trampoline upward, the trampoline will fold upward at the
BRACKETS as shown in illustration Step 4.
Step 4
Elastic Band
STEP 6
Refer to illustration Step 6. Set the position of the SECURE PINS(14) as shown. Lift up the RAILS(1, 2)
and insert the SECURE PINS(14) back into the RAILS(1, 2). Hook the Wire Rings onto the pins from the
bottom of the RAILS(1, 2).
STEP 7
Fold the trampoline again as shown in illustration Step 7.
Step 6
Wire Ring
Elastic Band
Wire Ring
Step 7
20
Bracket
Step 5

Advertisement

Table of Contents
loading

Table of Contents