Filter Chart - WAGNER VECTOR GRIP Owner's Manual

Airless spray gun
Table of Contents

Advertisement

Available languages

Available languages

6. Make sure the two retractor pins (4)
inside the gun head are still in the correct
position.
7. Insert the packing seal assembly into the
rear of the gun head and thread it by
hand until it stops.
8. Using a 3/8" socket, tighten the packing
seal assembly (3). Torque to 5 Nm (3.7 ft./
lbs.).
9. Grease both ends of the packing spring
(2) and place it over the packing seal
assembly in the gun head.
10. Place the end cap (1) over the packing
spring (2) so that the pilot inside the end
cap seats inside the packing spring.
11. Push the end cap (1) toward the gun
head while threading it into the gun
head. Using a wrench, tighten the end (1)
cap securely.
Reversing the Diffuser Seat
1. Using a wrench, loosen and remove the
diffuser from the front of the gun head.
2. Remove the diffuser O-ring from the front
of the gun head.
3. Remove the seat from the gun head. Flip
it around and reinstall back into the gun
head.
4. Reassemble the diffuser by reversing
steps 1-2.
Replacing/Removing the Filter
i
The gun filter should be cleaned
after every use.
1. Unclip the top of the trigger guard from
the gun head.
2. Using the bottom of the trigger guard as
a wrench, loosen and remove the handle
assembly from the gun head.
3. Pull the old filter out of the gun head.
Clean or replace.
4. Slide the new filter, tapered end first, into
the gun head.
5. Thread the handle assembly into the gun
head. Tighten with the trigger wrench.
6. Snap the trigger guard back onto the gun
head.
Vector Grip

Filter Chart

Part
Application
Number
0034383
Synthetic resin,
enamels, clean
varnishes, stains,
azures
0043235
Base coat enamels,
primer enamels,
fillers, marking
paints, textured
enamels
0034377
Emulsions, latex
paints, acrylic paints
0089323
Filler paints, large
area surfaces
Accessories
i
In order to use any accessories
with an F-thread (11/16")
an adapter (P/N 0553300) is
required.
Part Number
0538228
0538230
Filter
Type
Extra-
fine
Fine
Medium
Coarse
Description
Small grip kit
Large grip kit
GB
Filter
Color
Red
Yellow
White
Green
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2367218

Table of Contents