Creating Ethernet Wan Connection - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual

Creating Ethernet WAN Connection

Prior to creating an Ethernet WAN connection, specify a LAN port that will be used as the WAN
port (see the Interface Grouping section, page 63).
Figure 29. The page for creating a new connection. The General settings and Physical layer sections.
Parameter
Name
Connection Type
Enable
Direction
Physical interface
MAC
General settings
A name for connection for easier identification.
A type of network protocol to be used by the connection. Available
values:
PPPoE
•
IPoE,
•
Bridge.
•
Select the checkbox to enable the connection.
The direction of this connection.
Physical layer
Select the value corresponding to the LAN port specified as the
WAN port.
A MAC address assigned to the interface.
Page 41 of 110
Configuring via Web-based Interface
Description