D-Link DSL-2750U User Manual page 61

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
To allow the router to use the SNMP agent, select the Enable/Disable SNMP checkbox and set
the needed values in the fields on the page.
Parameter
Read-only access
community name
Read-write access
community name
System name
System location
The contact information
for the administrator
IP address
When you have specified the needed settings, click the Change button.
To disable the SNMP agent, deselect the Enable/Disable SNMP checkbox.
The name of the group of accounts which have read-only access to
the router.
The name of the group of accounts which have read/write access to
the router.
A name of the router for the SNMP manager.
Additional information on the router's location.
Additional information on the contact of the router's administrator.
The IP address of the host on which the SNMP manager is located.
Page 61 of 110
Configuring via Web-based Interface
Description