D-Link DSL-2750U User Manual page 48

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
Parameter
Hide Access Point
SSID
BSSID
Country
Channel
Clients Isolation
Enable Wireless Guest
Network
Guest SSID
Block multicast
When you have configured the parameters, click the Change button.
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
A name for the WLAN. By default, the value DSL_2750 is
specified. It is recommended to specify another name for the
network upon initial configuration (use digits and Latin characters).
The parameter that uniquely identifies your wireless network. You
cannot change the value of this parameter.
The country you are in. Select a value from the drop-down list.
The wireless channel number. By default, channel 6 is specified. If
you want to use another channel, select a value from the drop-down
list. When the auto value is selected, the router itself chooses the
channel with the least interference.
Select the checkbox to isolate the users of your WLAN (to forbid
wireless clients to communicate to each other).
Select the checkbox to create a separate part of your WLAN with
open authentication type and with no password. Wireless devices
connected to this network can access the Internet, but are isolated
from the router's LAN.
A name for the guest part of your WLAN.
Select the checkbox to disable multicasting for the router's WLAN.
Deselect the checkbox to enable multicasting from WAN
connections for which the Enable IGMP Multicast checkbox is
selected.
Page 48 of 110
Configuring via Web-based Interface
Description