Connecting To Web-Based Interface - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual

Connecting to Web-based Interface

When you have configured your computer, you can access the web-based interface and configure
needed parameters (for example, create an interface to connect to the Internet, configure the
connection to 3G network, change the parameters of the wireless network, specify the settings of
the firewall, edit the password for the administrator account, etc.)
1. Start a web browser (see the Before You Begin section, page 12).
2. In the address bar of the web browser, enter the IP address of the router (by default, the
following IP address is specified: 192.168.1.1). Press the Enter key.
Figure 7. Connecting to the web-based interface of the DSL-2750U device.
3. On the opened page, enter the username (login) and password for the administrator account
(by default, the following username and password are specified: admin, admin). Then
click the Enter button.
If the error " The page cannot be displayed " (or " Unable to display the page "/" Could not
!
connect to remote server ") occurs upon connecting to the web-based interface of the router,
make sure that you have properly connected the router to your computer.
After successful registration the system statistics page opens. The page displays general information
on the router and its software.
Figure 8. The login page.
Page 17 of 110
Installation and Connection