D-Link DSL-2750U User Manual page 97

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
Figure 75. The Control / URL-filter page. The URL-addresses tab.
On the opened page, specify the needed parameters.
Enter a URL address in the URL-address field, specify a port (as usual, you need to specify port
80 for HTTP), then click the Save button.
To remove an address from the list of URL addresses, select the relevant address in the table on the
URL-addresses tab and click the Delete button.
To disable the URL filter, deselect the Enable/Disable URL filter checkbox on the
Configuration tab, then click the Change button.
Figure 76. The page for adding an address for the URL filter.
Page 97 of 110
Configuring via Web-based Interface