Samsung XNO-6080R User Manual page 45

alarm input
You can set the alarm input type, activation time, and operation mode.
1. From the Setup menu, select the <event (
2. Click <alarm input>.
3. Set whether or not to <enable>.
4. Select the type.
• N.O. (Normal Open) : It is normally open, but if it is closed,
an alarm will be triggered.
• N.C. (Normal Close) : It is normally closed, but if it is open,
an alarm will be triggered.
5. Specify the <event activation time>.
• Always : Always check if an alarm occurs. It activates in
operated mode when the alarm occurs.
If set to <Always>, the activation time cannot be changed.
`
• Only scheduled time : Check if an alarm occurs at a specified day of the week for a specified time
period. It activates in operated mode when the alarm occurs.
- [ ] : Sets the time display format on the vertical axis.
- [Reset] : Reset all settings.
6. Specify an operation that will perform if an alarm occurs.
• FTP : Specify the use of FTP transfer in the alarm input setup.
Refer to "FTP / E-mail" for more details. (page 41)
`
• E-mail : Specify the use of email transfer in the alarm input setup.
Refer to "FTP / E-mail" for more details. (page 41)
`
• Record : You can set up the alarm to record to a Micro SD card or an NAS when operating.
Set <Device> to <On> in <Storage>. (page 42)
`
• Alarm output1 : Select whether to set the alarm output if an alarm is incoming, and specify the alarm
output time.
7. When done, click [apply].
)> tab.
time schedule
You can configure settings to transmit images at regular intervals at a scheduled operation time regardless of
the occurrence of an event.
1. From the Setup menu, select the <event (
2. Click <time schedule>.
3. Set whether or not to <enable>.
4. Specify the <transfer interval>.
5. Specify the <event activation time>.
• Always : Always activates in operated mode at the set
interval.
• Only scheduled time : Periodically activates in operated mode at a specified time and date.
The transfer interval setting value must be smaller than the preset activation interval to succeed in image transmission.
`
J
6. Specify the activation conditions.
• FTP : Specify the use of the FTP transfer if an event occurs.
Refer to "FTP / E-mail" for more details. (page 41)
`
7. When done, click [apply].
)> tab.
English _45