Table of Contents
Advertisement
network connection and setup
ButtonS uSeD in ip inStaLLer
a
b c
Item
Model name of the connected camera.
Device Name
Click the column to sort the list by model name.
a
However, search will be stopped if clicked during the search.
Alias
This function is not currently implemented.
b
Displays either <Static>, <Dynamic> or <PPPoE> for the current network connection
Mode
c
status.
Ethernet address for the connected camera.
MAC(Ethernet) Address
Click the column to sort the list by Ethernet address.
d
However, search will be stopped if clicked during the search.
IP address.
IP Address
Click the column to sort the list by IP address.
e
However, search will be stopped if clicked during the search.
Network setting for the camera.
Protocol
The factory default is "IPv4".
f
Cameras with the IPv6 setting will be displayed "IPv6".
DDNS URL address enabling access from the external Internet.
URL
However, this will be replaced with the <IP Address> of the camera if DDNS registration
g
has failed.
IPv4
Scans for cameras with the IPv4 setting.
h
16_ network connection and setup
d
e f g
h i
j
k
l
m
Description
Item
Scans for cameras with the IPv6 setting.
IPv6
i
Activated in an IPv6 compliant environment only.
Scans for cameras that are currently connected to the network.
Search
j
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
Auto Set
The IP Installer automatically configures the network settings.
k
Manual Set
You should configure the network settings manually.
l
Exit
Exits the IP Installer program.
m
For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download
`
M
the latest version from the Hanwha Techwin web site.
If the supporting OS is Windows 8.1, it is recommended that you use the Wisenet Device Manager instead of the IP Wisenet.
`
The Wisenet Device Manager Program can be downloaded by visiting the Hanwha Techwin website (http://www.hanwha-
security.com) under the menu <Customer Support> - <Technical Guides> - <Online Tool>.
Static ip Setup
manual network Setup
Run <ip installer_v2.XX.exe> to display the camera search list.
At the initial startup, both [auto Set] and [manual Set] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.
`
M
1. Select a camera in the search list.
Check the MAC address of the camera on the camera's label.
Both the [auto Set] and [manual Set] buttons will be
activated.
2. Click [manual Set].
The Manual Setting dialog appears.
<ip address>, <Subnet mask>, <Gateway>, <Http
port>, and <vnp port> of the camera are displayed in the
preset values.
3. In the <address> pane, provide the necessary information.
• MAC (Ethernet) Address : The MAC address imprinted on
the camera label is automatically displayed and requires no
user setting.
IP related parameters can be set only when DHCP is not checked.
`
M
Description
Advertisement
Table of Contents
