Samsung XNO-6080R User Manual page 36

setup screen
- External : It controls the color of the video when the alarm input terminal is synchronized with an
external device.
- Schedule : Set the time during which the camera is operated in the color mode.
• Dwell Time : It specifies the period for which the selected brightness condition must be maintained to
switch the lighting mode from Day to Night or vice versa.
• Duration : It specifies the interval of lighting mode conversion.
• Alarm in : The video is set to Color or B/W as the alarm sensor is open or closed.
If the Day/Night mode is set to External Input, the alarm input function of the Event-Alarm Input page is disabled.
`
• Activation time(Color) : It specifies the schedule for color mode operation.
If it is set, the Color mode is maintained from 00 second of the starting time to 59 second of the ending time.
`
When you switch to day/night mode, motion detection mode does not work.
`
J
to Setup Special
1. Select <Special>.
2. Select each item and set it properly.
• DIS : Compensates the image automatically when it is seen
to shake for stable image output.
Mitigate the degree of image vibration when the camera
`
M
vibrates due to the external factors such as wind.
• Sharpness : Adjust the overall sharpness of the image.
If selecting <on>, you can adjust the sharpness of the
image.
• Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.
• Gamma : Adjust the contrast of the image.
• Contrast : Adjusts the difference between the darkest area and the brightest area in the video.
• Color level : Adjust the strength of video color.
• Defog : Compensate the video in the foggy or cloudy weather.
It is set to <off> as a default. Specials are used when the video looks blurry in the foggy weather.
- Off : Disable the fog elimination function.
- Auto : The image is automatically compensated according to the foggy level. Adjust <Defog level>
to be more effective.
- Manual : The user manually sets the amount of compensation for each image.
If the defog mode is set to <Auto>, the performance is proportional to the fog level. To keep the set defog level without
`
J
regard to the fog level, set the defog mode to <Manual>.
If the manual defog level is high in a thin fog, the image may become too dark.
`
• Defog level : Control the defog level.
• LDC : To determine whether or not to use the image distortion correction.
• LDC Level : To adjust the level of the distortion correction factor.
36_ setup screen
to Set oSD
1. Select <oSD>.
2. Select each item and set it properly.
• Camera title : It specifies the name of the camera to be
displayed on the screen.
Select the <use> check box to add a camera name.
- Add : Click the <add> button and you can add a
total of 5 lines, 15 characters per line and a total of 60
characters.
- Preview : Click the <preview> button to check the name of camera that will be displayed on the
screen.
• Camera title X, Y : It specifies the position of the camera name on the screen.
• Date & time : Set the time display and date formats on the screen.
• Date & Time X, Y : Specify the position of time display on the screen.
• Weekday overlay : Specify the use of date display date on the screen.
• Size : Sets the size of OSD to small/medium/large.
• Color : Sets the color of the OSD to white/red/blue/green/black/gray.
• Transparency : Sets the transparency of OSD to opaque / low / middle / high.
A position-adjustable item (Camera title, Date & Time) may not be displayed normally if it overlaps with another fixed OSD
`
J
item.
Multilingual other than English: Input only in the selected language is available.
`
to set the heater
1. Select <Heater>.
When frost forms, the user can click the button and turn on
the heater for 30 minutes to remove the frost.
At low temperature when frost is likely to form, the heater is always
`
J
on; at a high temperature where the product can be affected by it, it does not operate, even when the request to operate has
been sent.
to Set ir
1. Select <ir>.
2. Select each item and set it properly.
• Mode : When the IR indicator turns on in B/W mode, the
screen will be protected from saturation on the center area
so that you can identify a short-distant object.
- Off : IR mode will be disabled.
- Auto1 : Adjust the IR brightness according to the brightness of the object on the center screen.
- Auto2 : The brightness of the IR is automatically adjusted according to the brightness of the object
located in the middle or periphery of the screen.
- Manual : Adjust the IR brightness manually.
• Level : Adjust the level of IR in manual mode.