Table of Contents
Advertisement
6. Click <port>.
7. Type in each item in the Port menu as necessary.
Neither the port range between 0 and 1023 nor port 3702 is available.
`
• HTTP : HTTP port used to access the camera via the web
browser.
The default is 80(TCP).
Setting the HTTP port for Safari and Google Chrome browsers to
`
65535 is not allowed by security policy.
• HTTPS : In this version, the security of the web communication protocol HTTP is strengthened. It can
be used when you set HTTPS mode in SSL.
The initial value is set to 443(TCP).
The available setting range is 1024~65535. (For security reasons, in your Safari or Google Chrome browser, you may not use
`
65535 as your HTTPS port.)
• RTSP : Used to transfer videos in the RTSP mode; the default is 554.
• Timeout : When connecting to RTSP, this function resets the connection if there's no response for a
certain time.
If changed the HTTP port, the browser exits.
`
M
Afterwards, address should contain the newly assigned HTTP port trailing the IP.
ex) IP address: 192.168.1.100, HTTP port : Assigned 8080 http://192.168.1.100:8080
(If HTTP port is set to 80, no need to specify the port number)
Using RTSP and HTTPS is recommended in order to prevent the image information from being restored.
`
8. When done, click [apply].
ptZ Setup
Digital ptZ
Use this settings page to move the camera view and perform the digital zoom.
<DPTZ profile> from <Video profile> should be selected for the setting.
`
J
1. From the Setup menu, select the <ptZ (
2. Click <Digital ptZ>.
to add a preset
1. Select the preset number to add.
2. Set the name for the preset.
3. Press the [add] button.
to delete a preset
1. Select the preset number to delete.
2. Press the [remove] button.
to move to a desired preset
1. Select a preset number that you want to move.
2. Press the [Go] button.
to set a group
The group function enables you to group various presets before calling them in sequence. Six groups can
save a total of 128 presets each.
1. Select a group setting mode.
2. Press the [add] button.
Entered in the bottom list.
3. If you want to delete a preset added, select it and press the [Delete] button.
4. Press the [Start] button.
It performs the group operation.
5. Press the [Stop] button.
The running group will be stop.
6. Press the [remove] button.
Selected group data will be deleted.
)> tab.
English _31
Advertisement
Table of Contents
