Table of Contents
Advertisement
Item
You can select a profile type in <Video profile> under the <Basic> setup menu.
Click the icon to display the name of the current profile.
`
Afterimages can be displayed on the screen under the following conditions if the video is
J `
Profile type
g
played in the monitoring page:
-
The resolution is changed due to a profile change.
-
Incoming data is being slowed due to a network delay when the profile is changed.
-
The web browser window size and location is changed.
Controls the PAN/TILT/ZOOM motion.
Zoom In (
)
PTZ
h
Zoom Out (
)
Move screen (
)
Auto tracking (
Profile access information
You can read the profile information.
i
Full Screen (
)
Fit to screen (
)
Switch View Mode
j
Size of the original file
(
)
Maintain Aspect Ratio
(
)
Capture
Saves the snapshot as an image file in the .png format.
k
Record
The user can save the video on the PC.
l
Pixel Counter
Checks the number of pixels in the selected area on the video screen.
m
Microphone control
Activates the microphone.
n
Description
Drag the bar on the right side of the UI up, or click the [
to zoom in the screen.
The farther the bar position is from the center, the faster the screen
will be zoomed in.
Drag the bar on the right side of the UI down or click the [
button to zoom out the screen.
The farther the bar position is from the center, the faster the screen
will be zoomed out.
Moves in the direction where the cursor is located.
Click the icon to turn it ON, and the camera will track a moving
)
person or object automatically.
Double click on the video screen, and the current video will be
played in the full screen of the monitor.
A view mode in which the size of the camera video automatically fits
to the web browser size.
View mode in which the video is played in the actual resolution.
View mode that adjusts the aspect ratio to best fit the resolution.
Item
Alarm output
Activate the Alarm Out port.
o
Audio control
Activates audio and adjusts the volume.
p
Some functions may not work on a specific browser or codec.
`
J
to capture the snapshot
1. Click [capture (
)] on the scene to capture.
] button
2. When a captured video is saved, a notification message appears.
The captured image is saved in the designated folder for each browser.
If the screen is not captured by IE browser in Windows 7 or higher, run the IE Browser with the Admin privilege.
`
M
]
to save
1. Click the [record (
)] icon.
2. To end the recording, press [record (
You can save the recorded file on the PC in an avi file format. Designate a path and save the video.
`
M
to fit the full screen
1. Click the [full Screen (
2. This will fit the Viewer to the full screen.
3. To leave full screen mode, click the [full Screen (
keyboard.
to use audio
1. Click [audio (
)] icon to activate audio communication.
2. Use [
If there is no sound from pulling in and out the audio jack while it is in operation, click the [Audio (
M
`
again.
To use audio, you need to set <Audio in> in "Video Profile" to <Enable> (page 27).
`
Description
)] again.
)] icon.
)] button again or press the [esc] key on the
] bar to control the volume.
)] icon to enable it
English _23
Advertisement
Table of Contents
