RED COMPACT 14-2015 Installation Manual page 52

10 - MENU ITEMS AND FUNCTION
SYSTEM CONFIGURATIONS
At the time of installation, the product must be configured according to the type of system by selecting the relative parameter in the
"SETTINGS" menu.
There are 5 possible configurations, described below:
Configuration Description
1 Room temperature control via boiler's on-board probe or by enabling external thermostat FACTORY SETTING
2 Room temperature control via boiler's on-board probe or enabling external thermostat; DHW production for
boiler or storage with thermostat (optional).
3 Room temperature control via boiler's on-board probe or enabling external thermostat; DHW production with
NTC probe (10 kΩ ß3435).
4 External Puffer controlled by thermostat.
5 External Puffer controlled by NTC probe (10 kΩ ß3435).
CONFIGURATION 1 (FACTORY SETTING)
1
50
5
V
4
2
3