Registration Roller Clutch (Cl3); Tray 1 Media Feed Clutch (Cl1) - Konica Minolta bizhub 40P Service Manual

6. Other
6.3.26

Registration roller clutch (CL3)

1. Remove the tray 1 feed unit.
See P.47
[2]
[1]
6.3.27

Tray 1 media feed clutch (CL1)

1. Remove the tray 1 feed unit.
See P.47
[1]
[3]
64
2. Remove the E-ring [1], and remove
[3]
NOTE
• When reinstalling the clutch, make
A0DXF2C062DA
2. Remove the harness from the har-
A0DXF2C063DA
3. Remove the E-ring [1], and remove
[2]
NOTE
• When reinstalling the clutch, make
[1]
A0DXF2C064DA
Field Service Ver. 1.0 Dec. 2007
the registration roller clutch [2].
sure that the notch [3] on the clutch
comes to the position shown in the
left picture.
ness guide [1].
the tray 1 media feed clutch [2].
sure that the notch [3] on the clutch
comes to the position shown in the
left picture.