Replacing The Tray 2 Separation Roller Assy - Konica Minolta bizhub 40P Service Manual

Field Service Ver. 1.0 Dec. 2007
C. Reinstall procedure
[1]
3. Push the tray 1 and 2 completely into the printer.
4. Reinstall the toner cartridge.
5. Close the top cover securely.
3.4.7

Replacing the tray 2 separation roller assy

A. Periodically replaced parts/cycle
• Tray 2 separation roller assy: Every 200,000 prints
B. Removal procedure
A0DXF2C001DA
[1]
[2]
A0DXF2C509DA
[1]
A0DXF2C006DA
3. Periodical check
1. Hold the tab on the new pick-up
roller assy [1] and slowly push it into
the shaft on the tray.
2. Aligning the small tabs [1] on the
pick-up roller assy with the slots of
the shaft, push the pick-up roller
assy [2] completely in so that the tab
fits into the slot.
1. Pull the tray 2 [1] out of the printer.
15