11.3 Service Menu; Serial Number; Firmware Version; Alignment - Konica Minolta bizhub 40P Service Manual
Hide thumbs
Also See for bizhub 40P:
- User manual (236 pages) ,
- Service manual (19 pages) ,
- Reference manual (392 pages)
Table of Contents
Advertisement
Field Service Ver. 1.0 Dec. 2007
11.3 SERVICE MENU
11.3.1
SERIAL NUMBER
Function
• Displays the serial number of the printer.
Use
• To confirm the printer's serial number.
Setting
1. Select [SERVICE MENU] and press the Menu/Select key.
/procedure
2. Select [SERIAL NUMBER] and press the Menu/Select key.
3. The serial number of the printer is displayed.
11.3.2
FIRMWARE VERSION
Function
• Displays the version number of the printer firmware.
• To use when the firmware is updated.
• To confirm the version number of the printer firmware.
Use
CONTROLLER F/W: Firmware of controller
ENGINE F/W
BOOT F/W
Setting
1. Select [FIRMWARE VERSION] and press the Menu/Select key.
/procedure
2. Select desired firmware and press the Menu/Select key.
3. Version number of firmware is displayed.
11.3.3
ALIGNMENT
A. TOP ADJUSTMENT
Function
• Adjusts the top margin of media for single-sided printing.
• To correct a misaligned print image.
TRAY 1 to TRAY 4 : Adjust the head margin of plain paper fed from the tray1 to 4.
Use
THICK
DUPLEX
Setting
1. Select [TOP ADJUSTMENT] and press the Menu/Select key.
/procedure
2. Select desired tray or media type and press the Menu/Select key.
3. Select desired adjustment amount with the up key /down key
Menu/Select key.
: Firmware of engine
: Boot firmware
: Adjust the head margin of thick paper.
: Adjust the head margin of duplex print media.
-8 (-4.1 mm) to +7 (+3.6 mm) (1 step: 0.5 mm)
11. SERVICE MENU
and press the
135
Advertisement
Chapters
Table of Contents
Troubleshooting
