C054: Compact Flash Disconnected; C060: Firmware Update Error; C071: Hardware Configuration Error - Konica Minolta bizhub 40P Service Manual

Field Service Ver. 1.0 Dec. 2007
14.3.17

C054: Compact flash disconnected

MFP board (MFPB)
Step
1 Reboot the main body.
Check the compact flash for proper con-
2
nection and correct as necessary.
3 Change compact flash
14.3.18

C060: Firmware update error

MFP board (MFPB)
Step
1 Reboot the main body.
Check the cable that has been used for
2 update of the firmware for proper connec-
tion and correct as necessary.
Check the firmware update file and if the
3 file is not the correct one, update the firm-
ware again.
Check the firmware update procedure and
4 if the procedure is not correct, update the
firmware again.
5 Update the firmware again.
Check the MFPB connector for proper con-
6
nection and correct as necessary.
7 Change MFPB
14.3.19

C071: Hardware configuration error

MFP board (MFPB)
Step
1 Reboot the main body.
Check the MFPB connector for proper con-
2
nection and correct as necessary.
3 Change MFPB
Relevant electrical parts
Action
Relevant electrical parts
Action
Relevant electrical parts
Action
Compact flash card
WIRING DIAGRAM
Control signal
⎯
⎯
⎯
WIRING DIAGRAM
Control signal
⎯
⎯
⎯
⎯
⎯
⎯
⎯
WIRING DIAGRAM
Control signal
⎯
⎯
⎯
14. Malfunction code
Location (electri-
cal component)
⎯
⎯
⎯
Location (electri-
cal component)
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Location (electri-
cal component)
⎯
⎯
⎯
163