Konica Minolta bizhub 40P Service Manual page 46

Field Service Ver. 1.0 Dec. 2007
[1]
C. Reinstall procedure
2. Remove the lid [1] of the tray 1.
3. Remove any media [2] in the tray 1.
[2]
A0DXF2C511DA
4. While pushing down the shaft of the
[1]
[2]
A0DXF2C512DA
1. Hold the tab on the new separation
[1]
A0DXF2C513DA
3. Periodical check
separation roller assy, widen the tab
[1] of the separation roller assy to
loosen it and then slowly remove the
separation roller assy [2] from the
shaft on the tray.
roller assy [1] and slowly push it into
the shaft on the tray.
11