Konica Minolta bizhub 40P Service Manual page 149

9. Menu
(2) LINES PER PAGE
Function • Sets the lines per page for PCL printing.
Use • To set the number of lines to be printed per page for PCL jobs.
Setting 1. Select [LINES PER PAGE] and press the Menu/Select key.
/procedure 2. Select desired line number with the up key /down key
key.
• The default setting is 60 lines.
(3) FONT SOURCE
<FONT NUMBER>
Function • Sets the PCL font to be used for PCL printing.
Use • To set the font to be used for printing PCL jobs.
Setting 1. Select [FONT NUMBER] and press the Menu/Select key.
/procedure 2. Select desired font with the up key /down key
• The default setting is 0.
NOTE
• According to the selected [FONT NUMBER], [PITCH SIZE] or [POINT SIZE] set-
ting is available.
• Details on the font which corresponds to the font No. can be checked by the
PCL font list.
See P.96
<PITCH SIZE/POINT SIZE>
Function • Sets the pitch size of the PCL font for PCL printing.
Use • To set the pitch size of the font to be used for printing PCL jobs.
Setting 1. Select [PITCH SIZE] and press the Menu/Select key.
/procedure 2. Select desired pitch size with the up key /down key
key.
• The default setting is 10.00 pt.
NOTE
• When one of the following "FONT NUMBERs" is selected, "PITCH SIZE" set-
ting is available.
FONT NUMBER: 0 to 5, 21 to 23, 54 to 57, 81, 82.
114
Field Service Ver. 1.0 Dec. 2007
and press the Menu/Select
5 lines to 128 lines
and press the Menu/Select key.
"0" to 102
and press the Menu/Select
0.44 pt to 99.99 pt