Menu - KERN HDB 5K5N Operating Manual

6.7.3 Peak value function
This function displays the highest load value (peak value) of a weighing.
Measuring frequency: 200ms
Attention:
Never exceed the maximum permitted load of the peak value on the
balance (!!Danger of breaking!!).
 Switch on the balance, keep the HOLD-button pressed until the current setting
„Hx" (H1 – H6) appears.
 Press ON/OFF button repeatedly until the setting „H6" is displayed.
 Use the HOLD-button to confirm your selection
 Suspend the material to be weighed
 The peak value appears for a short time, symbolised by the [] top left. The
balance returns automatically to zero and is ready for further measurement.

7. Menu

 When the balance is switched off, press the HOLD-button and keep it pressed
 Do not release the HOLD-button. Press also the ON/OFF/TARE-button and keep
it pressed
 Keep the ON/OFF/TARE-button pressed, however release the HOLD-button
 Press HOLD-button anew
 Keep both buttons pressed until in the display "tr" appears
 Release both buttons. The balance is situated in the menu.
 Using the ON/OFF/TARE button you can select between the following functions:
 tr (Zero tracking): ON/OFF
 AF (Auto off): ON/OFF
 rST (reset to factory settings): YES/NO
 Press the HOLD button to confirm the selected function
 In the display appears the current setting „ON" or „OFF". With help of the
ON/OFF/TARE-button you can select between „ON" or „OFF". Confirm your
selection with the HOLD-button. After a short period the balance returns
automatically to weighing mode.
26 HDB-BA-e-1730