Table of Contents
Advertisement
You can switch off the reminders to
replenish salt and rinse aid so that
the dishwasher will go into Standby
despite a lack of salt or rinse aid.
You cannot switch off fault
messages.
Refill display
If you want the dishwasher to go into
Standby mode despite a lack of salt or
rinse aid, you can switch off both of the
refill messages together.
^ Select the setting you want, and
confirm your selection with the
middle button.
Brightness
There are seven different display
brightness settings.
^ Select the brightness setting you
want, and confirm your selection with
the middle button.
Contrast
There are seven different display
contrast settings.
^ Select the contrast setting you want
and confirm your selection with the
middle button.
Check filters
You can adjust the interval at which the
reminder to check the filters appears.
You can set an interval of between 30
and 60 programme cycles.
The "Check filters" message is set at the
factory to appear after every 50
programme cycles.
This function can be deactivated if
wished.
^ Select the setting you want, and
confirm your selection with the
middle button.
External dispenser
Activate the automatic dispensing of
liquid detergent setting if you have
connected an optional G 60 Semi DOS
module.
The G 60 Semi DOS module is supplied
with its own installation instructions.
^ Select the setting you want, and
confirm your selection with the
middle button.
The setting will remain active until
you deactivate the "External
dispenser" option.
Settings menu
73
Advertisement
Table of Contents
