Table of Contents
Advertisement
Replacing a Key Phone with a Standard Phone
If for whatever reason you want to replace a Key Phone with a standard phone you need to dial
# # # 0 when the standard phone has been plugged in.
Failure to do so will result in the standard phone not ringing.
NB If in Direct Dial mode you need to dial * # # # 0.
Contact Orchid for more assistance
You can email us at the following address with any further enquiries regarding the Orchid PBX
Range. info@orchid-telecom.com
Capacity:
Internal sockets:
Communication channels:
Transmission loss:
Ringing Current:
Balance about earth:
Dialling mode:
Signalling:
Caller Display:
Broadcasting Output
Power Supply:
Approvals:
Technical Specifications
8 Lines and 32 Extensions
Expandable up to 16 Lines and 64 Extensions
Line and Extensions terminated on RJ11 sockets.
External Music socket 3.5 mm Mono
11
Extension to Extension < 1.5 dB
Extension to Exchange < 2 dB
AC65V/50Hz
* 300Hz...600Hz < 40dB
* 600Hz...3400Hz< 46dB
DTMF
Internal Dial tone 400 Hz continuous Sine wave
Internal Ring tone 400 Hz 1s on/4s off
Internal Busy tone 400 Hz, sine wave, 0.3s on/0.3s off
Receive; DTMF and FSK (Bell 202)
Send; FSK (Bell 202)
200M VRMS/Impedance 1K
AC230V/12W
Secondary 24V and 5V
CE and RoHS compliant
25
Advertisement
Table of Contents
