Table of Contents
Advertisement
To cancel calls being transferred to your secretary Dial:
# * 6 00
Do not disturb mode
If you do not want to receive internal or external calls Dial:
# * 71
and hang up.
To cancel "Do not disturb" mode Dial:
# * 70
To select a specific line on a "Call By Call" basis
The Extension can either be in "Dial 9 for a Line" Mode or Direct Dial Mode.
Lift Handset & Dial:
# 1
(For Line 1)
# 2
(For Line 2)
# 3
(For Line 3) etc
When in Direct Dial Mode, please remember to add a * in front of the above examples.
* # 1
(For Line 1) for example
Power Failure
In the event of a power failure the exchange lines will automatically be extended as follows:
Line 1 to 201
Line 2 to 202
Line 3 to 203
Line 4 to 204
Remote Programming
This is a useful feature if a company has several offices, it enables the Administrator to program
PBX features including Speed Dial memories, remotely. It also enables your PBX provider to
assist you in setting up the system.
To program the system remotely call the PBX and get transferred to Extension 201, the person on
Extension 201 should be instructed to Dial
RECALL (R)
then
# * #
*.
You can now program the System as required, NO NEED to dial the system password before
programming.
Alternatively the person on 201 of the system that needs programming can call you, Dial
RECALL
(R)
followed by
# * # *
both parties should hang up when programming is completed.
20
Advertisement
Table of Contents
