System Speed Dials - Orchid Telecom KS 832 Administration Manual

Dial Password Beep
Example 2
To restrict Extensions 207 and 208 to 5 minutes for Outgoing calls
Dial Password Beep
To Cancel Extension 208 being limited to 5 minutes for outgoing calls
Dial Password Beep
NOTE - 1 minute before the end of time limit a beep will be heard every 15 seconds
Up to 99 telephone numbers can be stored into the KS832 systems memory bank and can be
dialled by any Extension which has been Programmed to use this feature.
NOTE: Any Extension which has been programmed to use Speed-Dials can ALSO
store numbers into the memory bank.
The Administrator may or may not want certain Extension users to change, delete or add speed-
dials therefore the programming instructions are excluded from the Extension Userguide.
Only how to use the Speed-Dials is included
Storing Speed-Dials and Dialling Speed-Dials is the same sequence for "Dial 9" or " Direct dial"
extensions.
Assign Extensions for Speed Dialling
Example 1: To assign Extensions 201 and 202 for Speed Dialling;
Ext 201 Dial:
Example 2. To assign ALL extensions for Speed dialling
Ext 201
# 207 1 # 208 1 #
To Remove Extensions from using the Speed Dialling
Example to remove Ext 205
Ext 201
* 93 # Beep Hang Up
* 91 207 05 # Beep
* 92 208 # Beep Hang up

System Speed Dials

Password (beep) * 40 201 1 # 202 1 #
Dial: Password (beep)
repeat up to 216 if required.
Dial: Password (beep)
* 91 208 05 # Beep Hang up
(beep)
* 40 201 1 # 202 1 # 203 1 # 204 1 # 205 1 # 206 1
* 40 205 0 # (beep)
14