Warning Labels - Paramount Fitness FL-33 Assembly Manual

The following warning labels are affixed to the FL-33. Be certain that you and the
facility staff are aware of the meaning and importance of each label. If the labels become
damaged, replacements can be ordered free of charge from Paramount.
WARNING
!
SERIOUS INJURY CAN OCCUR
ON THIS EQUIPMENT IF THE
CABLES AND THEIR ATTACH-
MENT COMPONENTS ARE NOT
INSPECTED OFTEN. REPLACE
AT FIRST SIGNS OF WEAR.
P/N B2051 6/96
B2051
WARNING
!
SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT IF
THE PIN IS NOT COMPLETELY INSERTED BEFORE USE.
P/N B2065 11/96
B2065
WARNING
!
STABILIZING FOOT MUST BE ATTACHED HERE.
P/N B2017
B2017
!
USE THIS LAT BAR ON PARAMOUNT LAT STATIONS WITH 310
POUNDS OR LESS.
INSPECT CABLE FITTING AND CONNECTIONS PRIOR TO USE.
BE CERTAIN THAT THE CONNECTIONS ARE SECURE.
FAILURE TO FOLLOW THESE PROCEDURES MAY RESULT IN
SERIOUS INJURY.
P/N B1299

WARNING LABELS

ASTM Fxxx
ASTM Fxxx
ASTM Fxxx
B 2141
WARNING
B1299
MAINTENANCE
SCHEDULE
Check the integrity and function
of the following items. Replace
all worn components immediately.
Cables - Check tension, end
fittings, and coating
Check weight stack
locking nut
Upholstery - Wipe down and dry
Clean and condition
Frame - Wipe down and dry
Polish/Wax
Chrome - Wipe down and dry
Polish/Wax
Nuts/Bolts/Fasteners - Tighten
and/or adjust as needed
Guide Rods - Lubricate and clean
Linear Rods - Lubricate and clean
Seat Sleeves- Lubricate and clean
Adjustments/Locking Pins/
Tightening Knobs
Weight Stack Pin
Warning/Instruction Labels
Springs
Anti-Skid
Hand Grips
Order Paramount Service Kit P/N KIT-01
for recommended maintenance products
PARAMOUNT CUSTOMER SERVICE
1-800-721-2121
P/N B2315 5/98
B2315
ASTM Fxxx
W
D
WARNING
E
!
A
E
I
K
L
SERIOUS INJURY CAN OCCUR ON
L
Y
Y
THIS EQUIPMENT. FOLLOW THESE
PRECAUTIONS TO HELP AVOID INJURY.
1. BEFORE USING: Read all of the
warnings and obtain instruction on
the use of this machine. Use only for
the intended exercise. DO NOT
modify the machine.
2. Get a medical exam before
beginning an exercise program.
3. Keep body and clothing clear of all
moving parts. DO NOT wear anything
loose or dangling.
4. Inspect the machine before use.
DO NOT use it if it appears damaged.
DO NOT try to fix any machine.
Notify staff immediately.
5. INSPECT MACHINE DAILY for
loose, worn or damaged parts.
Tighten and adjust all loose parts.
Replace any part or label at first
signs of wear. Inspect all cables and
their connections closely. If you are
in doubt about any part, DO NOT
use the machine until the part is
replaced.
6. Inspect cables and connections
before using the machine. DO NOT
use this machine if any part appears
worn or damaged.
7. Be certain that weight pin B1003 is
completely inserted. Use only the pin
provided by the manufacturer. If
unsure, seek assistance.
8. NEVER pin the weights or top plate
into an elevated position. DO NOT
use the machine if found in this
condition. DO NOT try to fix. Seek
assistance.
9. Use only the incremental weights
supplied by the manufacturer. DO
NOT use dumbbells or other means
to add resistance to the machine.
10. NEVER allow children near this
machine. Supervise teenagers.
11. DO NOT REMOVE THIS LABEL.
REPLACE IF DAMAGED.
P/N B2060 1/98
B2060
ASTM F1749
14