Environmental Protection; Plug Replacement - Titan TTD129COM Safety And Operating Manual

Combi drill
Table of Contents

Advertisement

ENVIRONMENTAl PROTECTION

Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. For further
information visit www.recycle-more.co.uk
PlUG REPlACEMENT(UK and
Ireland only)
If you need to replace the fitted plug then follow
the instructions below.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured
markings identifying the terminals in your plug,
proceed as follows. The wire which is coloured
blue must be connected to the terminal which
is marked with N. The wire which is coloured
brown must be connected to the terminal which
is marked with L.
Warning: Never connect live or neutral wires to
the earth terminal of the plug. Only fit an approved
BS1363/A plug and the correct rated fuse.
Note: If a moulded plug is fitted and has to be
removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
BLUE
N (NEUTRAL)
OUTER
SLEEVE
13 AMP
FUSE
BROWN
L (LIVE)
CABLE GRIP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tte130com

Table of Contents