Table of Contents
Advertisement
l
NAPT: Static multiple mapping mode (1xN).
l
Dynamic NAPT (default): Dynamic multiple mapping mode (NxN).
Session Name: It allows you to select the session from the configured NAT Session
Name Configuration.
User's IP: It allows you to assign the IP address to map the corresponding NAT/NAPT
sessions.
Session Name Status: This table will be displayed at the middle of the page to show the
Session Name with its corresponding IP Address.
Number of NAT Configurations: It displays the total number of NAT Sessions entered.
Available Sessions: This table will be displayed at the bottom of the page to show all the
available Session Names with their corresponding WAN Interface.
Number of Sessions: It displays the total number of NAT Sessions entered.
5.6 Virtual Server Configuration
The Virtual Server Configuration page allows you to set the configuration of the Virtual
Server. Virtual Servers are used for port forwarding from the WAN to LAN networks. All
UDP/TCP ports are protected from intrusion. If any specific local PCs need to be mapped
to the UDP/TCP port on WAN side, please input the mappings here. There can be up to
20 different Virtual Server Configurations.
ID: It is the ID number corresponding to the Virtual Server configuration.
Public Port - Start: It allows you to enter the port number of the Public Network (WAN or
11
Advertisement
Table of Contents
