Lens Installation - Hitachi DK-Z50 Operating Instructions Manual

Lens installation

Lens installation
Install according to the following procedure.
1. Raise the lens lever and remove the mount cap.
2. Align the lens center mark with the indent at the
upper part of the lens mount and install the lens.
Notes
The following adjustments may be required according to the type of lens.
1. Lens flangeback, 2. Lens white shading.
3. Lens auto iris speed, 4. Lens iris close limit. (AUTO IRIS menu)
3. Lower the lens lever to secure the lens.
4. Engage the cable with the cable clamp and
connect it to the lens connector.
4