Hitachi DK-Z50 Operating Instructions Manual page 37

Function menu
8.3 MAINTENANCE main menu
■ＭＡＩＮＴＥＮＡＮＣＥ ＭＥＮＵ
ＡＵＴＯ ＳＥＴＵＰ ：＞
ＷＨＴ ＳＨＡＤＩＮＧ：＞
ＡＵＴＯ ＩＲＩＳ ：＞
ＳＨＵＴＴＥＲ ：＞
ＳＹＳＴＥＭ ：＞
ＯＴＨＥＲＳ ：＞
ＣＨＥＣＫ ：＞
8.3.1 AUTO SETUP sub menu (MAINTENANCE MENU)
*1: Displayed gate marker in enter of the picture for Skin tone detail Auto set up.
*2: Displayed 6 gate markers in the picture for Gray scale Auto set up.
8.3.2 WHT SHADING sub menu (MAINTENANCE MENU)
■ＷＨＴ ＳＨＡＤＩＮＧ：＜
ＥＸＴＥＮＤＥＲ ：ＯＦＦ（ｘ１）
ＷＨＴ ＳＨＡＤＩＮＧ：ＰＵＳＨ ＞ １ＳＥＣ
Ｒ Ｖ ＳＡＷ ： ０
Ｇ Ｖ ＳＡＷ ： ０
Ｂ Ｖ ＳＡＷ ： ０
ＩＮＩＴＩＡＬＩＺＥ ：
Item
AUTO SETUP Change screen to AUTO SETUP menu.
WHT SHADING Change screen to WHT SHADING menu.
AUTO IRIS Change screen to AUTO IRIS menu.
MIC GAIN Change screen to MIC GAIN menu.
GAIN SET Change screen to GAIN SET menu.
SHUTTER Change screen to SHUTTER menu.
SYSTEM Change screen to SYSTEM menu.
OTHERS Change screen to OTHERS menu.
CHECK Change screen to CHECK menu.
Item
CH1.A.PHASE
CH2.A.PHASE
GRAY SCALE
BLACK LEV 0.0 to 12.35%
FLARE LEV 0.0 to 24.70%
GAMMA LEV 42.20 to 67.70%
Position the gray scale chart to 6 gate markers
Item
EXTENDER
WHT SHADING
R V SAW -128 to +127
G V SAW -128 to +127
B V SAW -128 to +127
INITIALIZE
25
Description
Initial
Setting
setting
Skin tone Auto CH1 phase set. *1
Skin tone Auto CH2 phase set. *1
Gray scale Auto set up
5.0% Black level set
12.0% Flare level set
58.0% Gamma level set
Gate marker
Initial
Setting
setting
Display Lens extender position
OFF(X1)：Either of the following.
・When the extender is X1.
・The lens cable is not connected.
ON(X2)：When the extender is X2.
Set Auto WHT SHADING
0 Adjust R V SAW shading
0 Adjust G V SAW shading
0 Adjust B V SAW shading
Press the L+R buttons to initialize
menu items.
Description
*2
Description