Entering Service Mode - Daewoo DLX-26C2 Service Manual

SERVICE MODE
• Name : _____
• System : PAL
• Sound : BG
• Fine Tuning : 0
- Edit

5-2. Entering SERVICE MODE

Using the Service Remote controller, you can enter service mode directly.
5-2-1. Adjustment REMOCON and EEPROM initial DATA
A. The adjustment Specification use the SERVICE REMOCON R-34SVC
(S/N: 48B3034SVC)
B. Adjustment DATA
Key Name
S1 Heat-Run
S2 -
S3 Volume Test
S4 EDID write
S5 PANEL TEST
S6 PICTURE TEST
S7 -
White
balance
S8 /EEPROM
Erase
Details
1. Connect P701(Jumper) of Main PCB.
2. Press the "S4" key of service remocon.
Operating Method And then, TV set display "EDID WRITE OK"
upper left of screen.
3. After EDID WRITE, remove P701(Jumper)
PATTEN : BLACK -> WHITE -> RED -> GREEN -> BLUE
PATTEN : BRIGHT MIN -> CEN -> MAX ->
1. Press the "S8"key of service remocon.
EEPROM Erase 2. Press the "OK"key of user remocon.
operating method And then, TV set display "EEPROM CLEARED"
upper left of screen.
3. When you turn off/on AC, EEPROM data will be cleared.
CUT OFF R
CUT OFF G
CUT OFF B
DRIVE R
DRIVE G
DRIVE B
AUTO Y CLAMP
AUTO Y GAIN
Function
Default
Gumi Channel Map Write
Volume : 0 -> 32 -> 63 -> L -> R
CONTRAST MIN -> CEN -> MAX ->
COLOR MIN -> CEN -> MAX
DEMPOL Channel Map Write
Default
26"(32")
379(400)
447(448)
431(403)
373(340)
328(310)
322(330)
-26-
Adjustment
Adjustment
-
-
-
-
-
-
-
DO NOT USE
DO NOT USE
Remark
FIX
FIX
FIX
FIX
FIX
FIX
FIX