Service Mode Data - Daewoo DLA-32C7LAB Service Manual

Service Remote Controller

2) Service Mode Data

To enter SERVICE MODE,
A. Press "<VOL" -> "MUTE" -> "DISPLAY" -> "MUTE" button of remote controller(R-55M15)
B. Press "S9" button of SERVICE REMOTE CONTROLLER.
Content
Pw388_1 Sub Bias
Sub Gain
Bias R
Bias G
Bias B
Gain R
Gain G
Gain B
Pw338_2 Sub Bias
Sub Gain
PwFrontEND_1 R Offset
G Offset
B Offset
R Gain
G Gain
B Gain
Y Offset
Pb Offset
Pr Offset
Y Gain
Pb Gain
Pr Gain
RGB Auto Cal
YPrPb Auto Cal
PwFrontEnd_2 AV Brt
AV Cont
AV Color7.5 IRE
COMP_SOG_TH
Msp46X0 Sc pScale
Fm pScale
HDMI pScale
BBE Level
Mvoice Level
Audio Delay
Stereo ID
Misc DECODER Version :
MCU Version:
Tst Ptrn AT >>
Tst Ptrn MA >>
TV Auto Off
EDID Write
Default Value
32
74
35
32
32
36
32
52
32
64
411
408
393
280
269
269
435
534
544
352
369
379
>> Ready
>> Ready
128
128
On
4
0
12
32
30
12
15
10
MP 200#-##-##-##
LPP 200#-##-##-##
On
Ready
-10-
Description
For BRIGHTNESS adjustment (All inputs)
For CONTRAST adjustment (All inputs)
For R BRIGHTNESS adjustment (All inputs)
For G BRIGHTNESS adjustment (All inputs)
For B BRIGHTNESS adjustment (All inputs)
For R CONTRAST adjustment (All inputs)
For G CONTRAST adjustment (All inputs)
For B CONTRAST adjustment (All inputs)
For Bias adjustment of SUB PICTURE(PIP)
For Gain adjustment of SUB PICTURE(PIP)
*RGB offset values will be set by
executing "RGB Auto Cal" in
service mode.
*YPbPr offset values will be set by
executing "YPbPr Auto Cal" in
service mode.
*The automatically set offset values
may different from the default
value depend on B/D. However,
the main B/D should be replaced
or contact R&D center in Korea if
the OFFSET values differ more
than 20 from default value.
AV Brightness adjustment
AV Contrast adjustment
AV Color adjustment
Component Sync. Threshold value adjustment
Prescale adjustment for external input (AV, Component, PC etc.)
FM/AM prescale adjustment
BBE level control(disable)
HDMI prescale adjustment
Mvoice level control
Sound delay control
Stereo check